TP-Link TL-SG105-M2 | 5 Port Multi-Gigabit Unmanaged Network Switch, Ethernet Splitter | 2.5G Bandwidth | Plug & Play | Desktop/Wall-Mount | Fanless Metal Design | Limited Lifetime Protection

Product Information

and I have heard of no problems so far. Well, except for a tangle of Ethernet cables. Watch your step in the living Why you can trust Tom's Hardware Our expert reviewers spend hours testing and comparing products and services so you can choose the best for you. Find out more about how we test. Tested throughput extensively using iperf3 on the local network, and speedtest.net for Internet speed.

The one notable omission from this network switch is loop detection, which prevents your network being slowed to a crawl or disabled entirely by looped network traffic. This can be a very important troubleshooting tool in a complicated network, with visual indicators on a switch that tell you which Ethernet ports to investigate for issues. NOTE: Besides the included Installation Guide, a 2-sided paper guide with instructions and images, you should The switch is a simple dark metal steel box, with LEDs that show your System Power, Link, with Speed (Green the other 7 ports as outputs. Each of the 8 Ethernet ports are Auto-negotiating. That means you do nothing butkeer hogere snelheden verwijst naar de snelheden in vergelijking tot standaard 1G poorten. De werkelijke snelheden kunnen variëren op basis van het type en de kwaliteit van de kabel, beperkingen van de client en omgevingsfactoren. not a web-based graphical interface (GUI) but a software interface on this particular model (TL-SG108E). The Per-port lights made it obvious which ports run at 2.5 gigabit, 1 gigabit, and 100 megabit. I loved the fan-less design - zero noise coming from these TP-Link switches. I will never buy a fan-based switch again - they collect dust, and eventually die unless kept clean.

on-line. They had been using the Wi-Fi but it is slow and unreliable, in our household, and bandwidth was at aThis switch was made for the home office, or small business, but I decided to use it for a home network because LAN (local network) bandwidth tests reliably 2.3 gigabit average between two computers. Same speed when 2 computers are on the same switch, and when they are connected switch-to-switch. This was a HUGE improvement over a gigabit network which maxed out at about 0.95 gigabits. I looked at the Configuration Utility software, after installation, to see what information would be available. This is