About this deal
When applying the seal coat with a brush, use even, overlapping strokes. Keep an eye on corners and edges; puddling tends to occur in these locations. Paint the plywood. Apply your chosen paint type and color to the plywood. The method of paint application will depend on the desired finish. Apply the wood grain filler on the surface of the plywood using a scraper to press it into the imperfections in the wood. Allow the wood grain filler ample time to dry and then sand the entire surface of the plywood with 220-grit sandpaper. Semi-gloss can be a good choice for high-touch surfaces, like furniture pieces and cabinets. Additionally, since it’s durable and moisture-resistant, it can work well in kitchens and bathrooms. Usually, the sheen isn’t so dramatic as to be overwhelming, so it can be a better choice when you need to brighten up space or want to highlight trim subtly.
You can apply the guitar polish directly to the guitar or spray some on the cloth and rub it all over the guitar. For the most part, it’s used for acoustic guitars.A retro, used look can add some old-world charm to various plywood pieces or surfaces in your home. This result is best achieved by using a whitewashing effect on the plywood. A satin finish won’t completely hide imperfections, particularly significant dents. Satin paint can also be difficult to touchup. If you add more paint to just a spot or two, those spots usually stand out visually instead of seamlessly blending. You can apply the retro whitewash finish to plywood using water-based paint or solvent-based paints. Light pastel colors such as white, pale blue, and yellow make ideal colors for this technique. Immediately wipe the whitewash off. Using a clean, lint-free rag, rub the whitewash off, following the grain of the wood. This leaves hints of white in all the hollow surfaces in the wood. An alternative to a plain color finish can be painting on the guitar, gluing a printed image, cloth cover, and more. There are also many versatile sprays with glitter, metallic finish, and textures. The possibilities are endless. Applying Color to your guitar Using a Spray can
The satin finish is prone to scratching but adding a new layer of satin finish can cover up the scratches. In the majority of cases, the satin finish is applied in a thin form, which means the guitarists will be able to feel the wood on their hands.Polishing, especially with a sander or drill, can get relatively hot. Let your surface cool off before moving to the next compound, you don’t want to damage the clear coat. Allow the paint to dry completely. Give this coat of paint enough time to dry completely before adding another coat. Apply the primer to the plywood. Apply the primer in an even coat on the plywood, using a roller of a paintbrush. Our own Axminster Microcrystalline Waxes are an excellent choice of finishing wax. It is particularly great for objects that will be handled a lot, such as pens, as it is resistant to fingerprints and provides water resistance. The big issue with MDF is the edges, these are more porous than the top/bottom of the board and need more attention. To get a really smooth non-porous finish on the edges you can use wood filler or MDF edging tape. If the edges aren’t going to be seen simply add an extra coat of sealer/primer and rub down. What Alternatives are There to Specialist MDF Primers and Sealers?
If you want a good smooth paint finish on your MDF, there isn’t any real alternative to priming or sealing. Medium-density fibreboard is made from small wood fibres such as sawdust and shavings, which are mixed with resin and wax and compressed into panels. It is not fond of water as this can make the board swell. So it needs to be treated - or primed or sealed - before you consider painting it. Lightly sand the primed surface. Lightly sand the primer with 220-grit sandpaper. This is a light sanding to only smooth out any rough spots on the surface, not to remove the primer, so sanding by hand is preferable. Surface sanded with lower grit (240 grit vs 400 for example) will absorb more stain and will give a deeper color. Once the initial sanding is done, dust the plywood off and then sand the surface with 120-grit sandpaper. The purpose here is to try and get the plywood surface as smooth as possible.There are generally three ways (with different difficulty levels) you can finish your guitar, to look great, without investing in expensive equipment, fancy polishing and buffing wheels, or a painting booth. Staining plywood, particularly plywood with a good wood grain pattern, allows you to enrich the color of the final project. Drying may also be retarded if a preceding coat has not been allowed to harden sufficiently. The use of unsuitable thinners may also retard drying.
It is good for all types of wood and can be used without a sealer, although it won’t last as long, making it a versatile finish for those looking for high shine. If you have intricate mouldings, it is best to use a paint stripper to help lift the paint off the surface so that you don’t damage the wood or material below. The gloss guitars are convenient to clean as you can use the soft cloth and cleaning wax – it helps clear the stains and maintain the gloss/shine of the finishing. This finish is actually suitable to sustain the rough treatments, and its ability to cover the scratches promises a better aesthetic appeal. It creates a matte look for the guitars. However, it doesn’t bring out the wood’s grain, but you must remember that it wears off with time. Sand the surface of the plywood down with 80-grit sandpaper. If you use a higher grade of plywood, start with the 120-grit sandpaper since the surface of better grade plywood will be smoother.Always follow the label of the gloss for best results. Self-sealing glosses will not need a seal coat and can be applied directly to the bare, clean wood.